Jump to content

Email encryption

From Wikipedia, the free encyclopedia

Email encryption is encryption of email messages to protect the content from being read by entities other than the intended recipients. Email encryption may also include authentication.

Email is prone to the disclosure of information. Most emails are encrypted during transmission, but they are stored in clear text, making them readable by third parties such as email providers.[1] By default, popular email services such as Gmail and Outlook do not enable end-to-end encryption.[2] By means of some available tools, persons other than the designated recipients can read the email contents.[3]

Email encryption can rely on public-key cryptography, in which users can each publish a public key that others can use to encrypt messages to them, while keeping secret a private key they can use to decrypt such messages or to digitally encrypt and sign messages they send.

Encryption protocols

[edit]

With the original design of email protocol, the communication between email servers was in plain text, which posed a huge security risk. Over the years, various mechanisms have been proposed to encrypt the communication between email servers. Encryption may occur at the transport level (aka "hop by hop") or end-to-end. Transport layer encryption is often easier to set up and use; end-to-end encryption provides stronger defenses, but can be more difficult to set up and use.

Transport-level encryption

[edit]

One of the most commonly used email encryption extensions is STARTTLS. It is a TLS (SSL) layer over the plaintext communication, allowing email servers to upgrade their plaintext communication to encrypted communication. Assuming that the email servers on both the sender and the recipient side support encrypted communication, an eavesdropper snooping on the communication between the mail servers cannot use a sniffer to see the email contents. Similar STARTTLS extensions exist for the communication between an email client and the email server (see IMAP4 and POP3, as stated by RFC 2595). STARTTLS may be used regardless of whether the email's contents are encrypted using another protocol.

The encrypted message is revealed, and can be altered by, intermediate email relays. In other words, the encryption takes place between individual SMTP relays, not between the sender and the recipient. This has both good and bad consequences. A key positive trait of transport layer encryption is that users do not need to do or change anything; the encryption automatically occurs when they send email. In addition, since receiving organizations can decrypt the email without cooperation of the end user, receiving organizations can run virus scanners and spam filters before delivering the email to the recipient. However, it also means that the receiving organization and anyone who breaks into that organization's email system (unless further steps are taken) can easily read or modify the email. If the receiving organization is considered a threat, then end-to-end encryption is necessary.

The Electronic Frontier Foundation encourages the use of STARTTLS, and has launched the 'STARTTLS Everywhere' initiative to "make it simple and easy for everyone to help ensure their communications (over email) aren’t vulnerable to mass surveillance."[4] Support for STARTTLS has become quite common; Google reports that on Gmail, 90% of incoming email and 90% of outgoing email was encrypted using STARTTLS by July 24, 2018.[5]

Mandatory certificate verification is historically not viable for Internet mail delivery without additional information, because many certificates are not verifiable and few want email delivery to fail in that case.[6] As a result, most email that is delivered over TLS uses only opportunistic encryption. DANE is a proposed standard that makes an incremental transition to verified encryption for Internet mail delivery possible.[7] The STARTTLS Everywhere project uses an alternative approach: they support a “preload list” of email servers that have promised to support STARTTLS, which can help detect and prevent downgrade attacks.

End-to-end encryption

[edit]

In end-to-end encryption, the data is encrypted and decrypted only at the end points. In other words, an email sent with end-to-end encryption would be encrypted at the source, unreadable to service providers like Gmail in transit, and then decrypted at its endpoint. Crucially, the email would only be decrypted for the end user on their computer and would remain in encrypted, unreadable form to an email service like Gmail, which wouldn't have the keys available to decrypt it.[8] Some email services integrate end-to-end encryption automatically.

Notable protocols for end-to-end email encryption include:

OpenPGP is a data encryption standard that allows end-users to encrypt the email contents. There are various software and email-client plugins that allow users to encrypt the message using the recipient's public key before sending it. At its core, OpenPGP uses a Public Key Cryptography scheme where each email address is associated with a public/private key pair.

OpenPGP provides a way for the end users to encrypt the email without any support from the server and be sure that only the intended recipient can read it. However, there are usability issues with OpenPGP — it requires users to set up public/private key pairs and make the public keys available widely. Also, it protects only the content of the email, and not metadata — an untrusted party can still observe who sent an email to whom. A general downside of end to end encryption schemes—where the server does not have decryption keys—is that it makes server side search almost impossible, thus impacting usability.

The content of an email can also be end-to-end encrypted by putting it in an encrypted file (using any kind of file encryption tool[9]) and sending that encrypted file as an email attachment.[10]

Demonstrations

[edit]

The Signed and Encrypted Email Over The Internet demonstration has shown that organizations can collaborate effectively using secure email. Previous barriers to adoption were overcome, including the use of a PKI bridge to provide a scalable public key infrastructure (PKI) and the use of network security guards checking encrypted content passing in and out of corporate network boundaries to avoid encryption being used to hide malware introduction and information leakage.

Setting up and using email encryption

[edit]

Transport layer encryption using STARTTLS must be set up by the receiving organization. This is typically straightforward; a valid certificate must be obtained and STARTTLS must be enabled on the receiving organization's email server. To prevent downgrade attacks organizations can send their domain to the 'STARTTLS Policy List'[11]

Most full-featured email clients provide native support for S/MIME secure email (digital signing and message encryption using certificates). Other encryption options include PGP and GNU Privacy Guard (GnuPG). Free and commercial software (desktop application, webmail and add-ons) are available as well.[12]

While PGP can protect messages, it can also be hard to use in the correct way. Researchers at Carnegie Mellon University published a paper in 1999 showing that most people couldn't figure out how to sign and encrypt messages using the current version of PGP.[13] Eight years later, another group of Carnegie Mellon researchers published a follow-up paper saying that, although a newer version of PGP made it easy to decrypt messages, most people still struggled with encrypting and signing messages, finding and verifying other people's public encryption keys, and sharing their own keys.[14]

Because encryption can be difficult for users, security and compliance managers at companies and government agencies automate the process for employees and executives by using encryption appliances and services that automate encryption. Instead of relying on voluntary co-operation, automated encryption, based on defined policies, takes the decision and the process out of the users' hands. Emails are routed through a gateway appliance that has been configured to ensure compliance with regulatory and security policies. Emails that require it are automatically encrypted and sent.[15]

If the recipient works at an organization that uses the same encryption gateway appliance, emails are automatically decrypted, making the process transparent to the user. Recipients who are not behind an encryption gateway then need to take an extra step, either procuring the public key, or logging into an online portal to retrieve the message.[15][16]

Encrypted email providers

[edit]

Since 2000, the number of available encrypted email providers[17] has increased significantly.[18]

See also

[edit]

References

[edit]
  1. ^ "Email encryption in transit". Gmail Help. Google Inc. Retrieved 2020-06-15.
  2. ^ "Enable hosted S/MIME for enhanced message security". GSuite Admin Help. Google Inc. Retrieved 2020-06-15.
  3. ^ SMEmail – A New Protocol for the Secure E-mail in Mobile Environments, Proceedings of the Australian Telecommunications Networks and Applications Conference (ATNAC'08), pp. 39–44, Adelaide, Australia, Dec. 2008.
  4. ^ "Announcing STARTTLS Everywhere: Securing Hop-to-Hop Email Delivery". EFF. 2018-06-25. Retrieved 2018-07-14.
  5. ^ "Email encryption in transit".
  6. ^ "Postfix TLS Support". Postfix.org. Retrieved 2014-04-16.
  7. ^ Dukhovni; Hardaker (2015-10-14). SMTP Security via Opportunistic DANE TLS. IETF. doi:10.17487/RFC7672. RFC 7672.
  8. ^ "End-to-end encryption". How To Geek. Retrieved 9 April 2015.
  9. ^ Mitchell, Paul (January 16, 2022). "Sending encrypted e-mails with PGP". Privacy Dedicated Library.
  10. ^ "Secure email attachments with 7-Zip". Columbia College Information Technology, Columbia University. Retrieved 16 July 2018.
  11. ^ STARTTLS FAQ Retrieved 2018-07-24.
  12. ^ Eric Geier, PCWorld. "How to Encrypt Your Email." April 25, 2012. Retrieved May 28, 2014.
  13. ^ Klint Finley, WIRED. "Google's Revamped Gmail Could Take Encryption Mainstream." Apr 23, 2014. Retrieved June 04, 2014.
  14. ^ In Security and Usability: Designing Secure Systems that People Can Use, eds. L. Cranor and G. Simson. O'Reilly, 2005, pp. 679-702. "Why Johnny Can’t Encrypt."
  15. ^ a b By Luis Rivera, SC Magazine. "Protecting customer privacy through email encryption." March 11, 2014. July 18, 2014.
  16. ^ Gibson, Stan (July 22, 2014). "Health care data security now defined by encryption thin clients". SearchHealthIT.
  17. ^ "10 Best Private Email Services". January 8, 2024. Retrieved April 9, 2024.
  18. ^ Sparrow, Elijah; Halpin, Harry; Kaneko, Kali; Pollan, Ruben (2016). Foresti, Sara; Persiano, Giuseppe (eds.). "LEAP: A Next-Generation Client VPN and Encrypted Email Provider". Cryptology and Network Security. Lecture Notes in Computer Science. 10052. Cham: Springer International Publishing: 176–191. doi:10.1007/978-3-319-48965-0_11. ISBN 978-3-319-48965-0.