Our filtration media makes it possible…

Redox reactions can be chemically complex. Simply stated, during a Redox reaction electrons are transferred between molecules, creating new elements. For instance, when free-chlorine comes in contact with the filtration media, it is changed into a benign, water-soluble chloride. This reaction changes free-chlorine to a larger chloride molecule. This new salt-based molecule requires more energy (heat) to evaporate than a water heater at industry-standard maximum temperatures allows and is too large to be absorbed by the skin. It is then carried harmlessly through the water supply.

Chlorgon

…is one type of Redox filtration media. Researched, developed and patented by David Farley, CEO of Sprite Industries, Inc., Chlorgon converts free chlorine and some combined chlorines to a harmless chloride salt. A proprietary blend of Copper, Zinc and Calcium Sulfite, Chlorgon works well in a variety of temperatures from hot to cold. It is also the active ingredient for Sprite’s Mediterranean Blue: De-chlorinating Bath Salts.

All Sprite filtered shower products contain Chlorgon.

Why Not Carbon?

  • The temperature of tap water ranges from 60- 75 degrees (F).
  • Showering temperatures typically range from 85-105 degrees (F).

Carbon is a cold water filter. It is most effective at temperature ranges of 50-80 degrees (F). At higher temperatures, carbon becomes ineffective. It will “off-load” and release contaminants into the water. Sprite shower filtration media was designed for hot water, becoming more efficient as the water temperature increases.

  • The flow rate of most drinking water filters is less than 1/2 gallon per minute (GMP).
  • Shower water flows at a minimum of 2.5 GPM (5x greater).

Even using cold water, a minimum of 5x the amount of carbon would be necessary to filter the shower water.

  • Most drinking filters produce 1-3 gallons per day (GPD).
  • Shower usage ranges from 12.5-50 GPD (12x greater).

Even with cold water and a 5x larger carbon filter, the filter would have to be an additional 12x larger, or a total of 60x the size of the original tap water filter.

Of course, you don’t shower in cold water and wouldn’t use a 60 lb. shower filter. And we wouldn’t cut a carbon filter in half and expect it to adequately filter shower water. Instead, Sprite invested a great amount of research in developing a line of realistic catalytic shower filters that filter both free and combined chlorines, dirt, sediment, odors, hydrogen sulfide, iron oxides, and more, from your shower water.

NSF CERTIFIED TO STANDARD 177!

To keep updated on current certified models visit www.nsf.org