First off, you should be powering this charger with some real juice. At first, I was simply plugging the USB cable into one of the available USB ports in my Chevy, wrong! I soon learned that these factory ports are much too wimpy to power this charger, I would keep getting intermittent charging, on and off. At least this is my experience. I learned that I need to use an accessory port using a high power adapter like this beautiful one:
https://www.amazon.com/gp/product/B0BLYX8SHZ/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
All power problems solved! Also fyi you can also purchase this exact ESR charger with their own included charging adapter for about $10 more, as a kit.
My set up includes mounting the ESR charger to the ball end of a flexible metal gooseneck and it works great. I had to wrap a bit of electrical tape around the ball end to make my ESR charger fit tightly. This gooseneck has a big spring clamp at the end and can work great for any DIY install. I purchased it locally at a computer store but I believe this is the same one here on Amazon:
https://www.amazon.com/SLBSTORES%C2%AE-Gooseneck-Universal-Bracket-Flexible/dp/B01GNQD5J2
I would not recommend mounting this charger to a vent, especially because this magnet is super strong. I use an ESR MagSafe compatible case, see picture. It works and holds super strong on to the ESR charger, it is not going anywhere!
So everything has been working great except for one thing. If you're like me, you are constantly switching back and forth between Portrait and Landscape orientation. Every time I rotated it, the magnetic strength was so strong it would begin to rotate and unloosen the entire charger from the ball mount. Very frustrating. At first my solution was to stick on one of those charging metal rings on the back of my phone case, on top of the already existing ESR MagSafe ring built into the case. Because this provided a harder, smoother surface to rotate on as opposed to the soft plastic case material. This worked okay but the more I thought about it, I wondered why there was always so much friction when there shouldn't be any on the smooth glass surface of the charger. Upon further inspection, I figured out that the friction was being caused by this tiny black plastic lip that surrounds the outer edge of the entire glass surface of the charger. I am talking only about .5mm in height above the surface of the glass. You can feel it with your fingernail. This is what the case surface has actually been resting on, not the glass! Is this a defect? I don't know. But I have purchased two of these chargers and they both had this lip. Any ways, on to my modification....
I modified this ESR Charger by slicing off the excess lip surrounding the glass charging surface with a razor blade, see picture. Super easy. This allows for all surfaces to connect flat on to the charging surface. I held the razor blade at about a 45 degree angle all the way around. This eliminated the ridge that was causing the great amount of friction. If you always keep your phone in one orientation then this modification is not necessary. But for those that constantly rotate it, this makes a world of difference in smoothness! I removed the stick on metal ring on my case, don't need it anymore. The magnetic hold is super strong and I can smoothly and easily rotate between Portrait & Landscape, it works amazing! Now it is perfect, yes!
Sustainability features
This product has sustainability features recognized by trusted certifications.
Carbon impact
Carbon emissions from the lifecycle of this product were measured, reduced and offset.
As certified by
Climate neutral by ClimatePartner The Climate neutral label by ClimatePartner certifies that the carbon footprint of a product was calculated and all associated emissions were offset. Additionally, ClimatePartner encourages companies to set ambitious reduction targets and reduce their products' carbon footprints. The certificate number can be entered on ClimatePartner’s website for additional information such as the supported carbon offset project(s). ClimatePartner is improving lives by helping companies tackle climate change with practical solutions.
Certification Number
Z4NNK8 Part of
Make it a bundle
We found 1 bundle with this item:
ESR for MagSafe Car Mount Charger (HaloLock), 15W Magnetic Wireless Car Charger, Compatible with MagSafe Car Charger, Air Vent/Dashboard Phone Holder Mount for iPhone 15/14/13/12, Fast Charging, Black
Page 1 of 1Start overPage 1 of 1
Frequently bought together
This item: ESR for MagSafe Car Mount Charger (HaloLock), 15W Magnetic Wireless Car Charger, Compatible with MagSafe Car Charger, Air Vent/Dashboard Phone Holder Mount for iPhone 15/14/13/12, Fast Charging, Black
$19.99
Get it as soon as Sunday, Jul 28
In Stock
+
$15.29
Get it as soon as Sunday, Jul 28
In Stock
+
![Ailun 3 Pack Screen Protector for iPhone 15 Pro [6.1 inch] + 3 Pack Camera Lens Protector with Installation Frame,Case Friend](https://cdn.statically.io/img/images-na.ssl-images-amazon.com/images/I/71TnZkDlBHL._AC_UL116_SR116,116_.jpg)
$6.98
Get it as soon as Sunday, Jul 28
In Stock
Total price:
To see our price, add these items to your cart.
Choose items to buy together.
Top rated similar items
Page 1 of 1 Start overPage 1 of 1
Climate Pledge FriendlyProducts with trusted sustainability certification(s). Learn morePRODUCT CERTIFICATION (1)
Climate neutral by ClimatePartner certifies the carbon footprint of a product was calculated and all associated emissions were offset.
Climate Pledge FriendlyProducts with trusted sustainability certification(s). Learn morePRODUCT CERTIFICATION (1)
Climate neutral by ClimatePartner certifies the carbon footprint of a product was calculated and all associated emissions were offset.
Climate Pledge FriendlyProducts with trusted sustainability certification(s). Learn morePRODUCT CERTIFICATION (1)
Climate neutral by ClimatePartner certifies the carbon footprint of a product was calculated and all associated emissions were offset.
Climate Pledge FriendlyProducts with trusted sustainability certification(s). Learn morePRODUCT CERTIFICATION (1)
Climate neutral by ClimatePartner certifies the carbon footprint of a product was calculated and all associated emissions were offset.
From the brand
Compare with similar items
This Item  ESR for MagSafe Car Mount Charger (HaloLock), 15W Magnetic Wireless Car Charger, Compatible with MagSafe Car Charger, Air Vent/Dashboard Phone Holder Mount for iPhone 15/14/13/12, Fast Charging, Black |  |  |  |  |  | |
| Price | -43% $19.99 List: $34.99 | $26.99 | -43% $16.99 List: $29.99 | $23.99 | -25% $29.99 List: $39.99 | -22% $27.99 List: $35.99 |
| Delivery | Get it as soon as Sunday, Jul 28 | Get it as soon as Sunday, Jul 28 | Get it as soon as Sunday, Jul 28 | Get it as soon as Sunday, Jul 28 | Get it as soon as Monday, Jul 29 | Get it as soon as Tuesday, Jul 30 |
| Customer Ratings | ||||||
| Suction power | ||||||
| Charging power | ||||||
| Durability | ||||||
| Quality of material | ||||||
| Sturdiness | ||||||
| Sold By | Dexterifytech US Store | LAMJAD Direct | JoyGeek direct | Beeasy | Dexterifytech US Store | Dexterifytech US Store |
| connector type | USB-A to USB-C | USB Type C, MagSafe | USB-A to USB-C | USB Type C | USB-A to USB-C | USB-A to USB-C |
| number of usb ports | 1 | 1 | 1 | 1 | 2 | 1 |
| compatible devices | Smartphones | Cellular Phones | Apple iPhone 14/14 Pro/14 Plus/14 Pro Max/13/ 13 Pro/ 13 Pro Max/ 13 Mini/ iPhone 12/ 12 Pro/ 12 Pro Max/ 12 Mini | Cellular Phones | Smartphones | Cellular Phones |
| input voltage | 120 volts | 7.5 volts | 12 volts | 12 volts | 12 volts | 120 volts |
| connector gender | Male-to-Male | Male-to-Male | Male-to-Male | — | Male-to-Male | Male-to-Male |
| power source | Corded Electric | Corded Electric | Corded Electric | Battery Powered | Corded Electric | Corded Electric |
Product Description
Accessories Designed for MagSafe
 Car Charger with MagSafe |  Car Charger with MagSafe |  Car Charger with MagSafe |  Magnetic Charger |  Universal Ring |  Hybrid Case |  Hybrid Case + Stash Stand | |
|
Customer Reviews
|
24,072
|
1,356
|
88
|
2,070
|
9,666
|
124,854
|
26,004
|
|
Compatibility
| iPhone 12 series or later | iPhone 12 series or later | iPhone 12 series or later | iPhone 12 series or later | iPhone 12 series or later | iPhone 15 Pro Max | iPhone 15 Pro Max |
|
Designed for MagSafe
| ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
|
Magnetic Strength
| 1,600 gf | 1,600 gf | 1,600 gf | 1,000 gf | Matches paired device | 1,500 gf | 1,500 gf |
|
Main Feature
| Power in a snap | Qi2 15W certified charger | Qi2 15W certified charger | Qi2 15W certified charger | Upgrade to MagSafe | Strong magnetic lock | Strong magnetic lock |
|
Other Feature
| Power in a snap | Power in a snap | Power in a snap | Made for Apple Watch | Strong magnetic lock | Military-grade protection | Built-in Stash Stand |
|
Material
| ABS,PCBA,magnet,glass,silicone | ABS,PCBA,magnet,glass,silicone | ABS,PCBA,magnet,glass,silicone | ABS, PC, magnet, metal | Zinc alloy, TPE lining | Polycarbonate, Polyurethane | Zinc alloy, polycarbonate |
Videos
Page 1 of 1Start OverPage 1 of 1
Videos for this product
5:24
Click to play video
Unboxing and set up for MagSafe esr car charger
Phillip Langstaff
Videos for this product
2:15
Click to play video
Customer Review: Works best with MagSafe Case.
Dubble Kessler
Videos for this product
2:19
Click to play video
HaloLock Car Mount, Review and Demo, A Very Smart Design!
Seth Reviews
Videos for this product
0:51
Click to play video
Review, demo and discussion- how well does it work
Brandi Lynn Carr
Videos for this product
2:28
Click to play video
ESR Magsafe Car Charger Mount - WHY IT WORKS BETTER
The French Glow
Sustainability features
This product has sustainability features recognized by trusted certifications.
Carbon impact
Carbon emissions from the lifecycle of this product were measured, reduced and offset.
As certified by
Climate neutral by ClimatePartner The Climate neutral label by ClimatePartner certifies that the carbon footprint of a product was calculated and all associated emissions were offset. Additionally, ClimatePartner encourages companies to set ambitious reduction targets and reduce their products' carbon footprints. The certificate number can be entered on ClimatePartner’s website for additional information such as the supported carbon offset project(s). ClimatePartner is improving lives by helping companies tackle climate change with practical solutions.
Certification Number
Z4NNK8 Part of
Reviews with images
Quality charger with a strong magnetic attachment
This is a very nice charger that we bought as a replacement for a cradle-style dock that used to rattle when driving. It came well packaged and with two different mounting options for the vehicle. It was extremely easy to get ready and set up in place inside the vehicle. It can either use a sticker-style base to affix a ball joint to your dashboard or a clamp-style base to affix the same ball to a vehicle vent. I liked that it came with the two different options, which allows for different preferences or finding out that one of the options wouldn't work for your vehicle.The magnets hold very strongly and the phone doesn't move around at all. One thing to note is that because the magnets hold so strongly, it is actually a little hard to get my phone off of the charger. I make sure that I try and pry my phone off at an angle but my partner just pulls the phone straight off, and because this charger holds onto the air vent using only clamping pressure it actually slowly pulls the charger off the vent it's mounted to and makes it loose. Once I realized that this was happening I just make sure to press the charger back onto the vent every few days to make sure that it's fully seated and that has solved the problem.Overall, it's a terrific charger. It's not charging as quickly as a wired connection would but for the ease of use it's perfect to throw my phone onto it for 5% extra charger of a 10-minute drive. I'm thinking of buying another one for use in the other vehicle even though we have a fully functioning cradle-style charger in there because I like this one so much.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on September 26, 2023
https://www.amazon.com/gp/product/B0BLYX8SHZ/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
All power problems solved! Also fyi you can also purchase this exact ESR charger with their own included charging adapter for about $10 more, as a kit.
My set up includes mounting the ESR charger to the ball end of a flexible metal gooseneck and it works great. I had to wrap a bit of electrical tape around the ball end to make my ESR charger fit tightly. This gooseneck has a big spring clamp at the end and can work great for any DIY install. I purchased it locally at a computer store but I believe this is the same one here on Amazon:
https://www.amazon.com/SLBSTORES%C2%AE-Gooseneck-Universal-Bracket-Flexible/dp/B01GNQD5J2
I would not recommend mounting this charger to a vent, especially because this magnet is super strong. I use an ESR MagSafe compatible case, see picture. It works and holds super strong on to the ESR charger, it is not going anywhere!
So everything has been working great except for one thing. If you're like me, you are constantly switching back and forth between Portrait and Landscape orientation. Every time I rotated it, the magnetic strength was so strong it would begin to rotate and unloosen the entire charger from the ball mount. Very frustrating. At first my solution was to stick on one of those charging metal rings on the back of my phone case, on top of the already existing ESR MagSafe ring built into the case. Because this provided a harder, smoother surface to rotate on as opposed to the soft plastic case material. This worked okay but the more I thought about it, I wondered why there was always so much friction when there shouldn't be any on the smooth glass surface of the charger. Upon further inspection, I figured out that the friction was being caused by this tiny black plastic lip that surrounds the outer edge of the entire glass surface of the charger. I am talking only about .5mm in height above the surface of the glass. You can feel it with your fingernail. This is what the case surface has actually been resting on, not the glass! Is this a defect? I don't know. But I have purchased two of these chargers and they both had this lip. Any ways, on to my modification....
I modified this ESR Charger by slicing off the excess lip surrounding the glass charging surface with a razor blade, see picture. Super easy. This allows for all surfaces to connect flat on to the charging surface. I held the razor blade at about a 45 degree angle all the way around. This eliminated the ridge that was causing the great amount of friction. If you always keep your phone in one orientation then this modification is not necessary. But for those that constantly rotate it, this makes a world of difference in smoothness! I removed the stick on metal ring on my case, don't need it anymore. The magnetic hold is super strong and I can smoothly and easily rotate between Portrait & Landscape, it works amazing! Now it is perfect, yes!
Color: BlackVerified Purchase
ESR MagSafe Charger, Love it!...and a modification that makes it even better...
Reviewed in the United States on September 26, 2023
First off, you should be powering this charger with some real juice. At first, I was simply plugging the USB cable into one of the available USB ports in my Chevy, wrong! I soon learned that these factory ports are much too wimpy to power this charger, I would keep getting intermittent charging, on and off. At least this is my experience. I learned that I need to use an accessory port using a high power adapter like this beautiful one:Reviewed in the United States on September 26, 2023
https://www.amazon.com/gp/product/B0BLYX8SHZ/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
All power problems solved! Also fyi you can also purchase this exact ESR charger with their own included charging adapter for about $10 more, as a kit.
My set up includes mounting the ESR charger to the ball end of a flexible metal gooseneck and it works great. I had to wrap a bit of electrical tape around the ball end to make my ESR charger fit tightly. This gooseneck has a big spring clamp at the end and can work great for any DIY install. I purchased it locally at a computer store but I believe this is the same one here on Amazon:
https://www.amazon.com/SLBSTORES%C2%AE-Gooseneck-Universal-Bracket-Flexible/dp/B01GNQD5J2
I would not recommend mounting this charger to a vent, especially because this magnet is super strong. I use an ESR MagSafe compatible case, see picture. It works and holds super strong on to the ESR charger, it is not going anywhere!
So everything has been working great except for one thing. If you're like me, you are constantly switching back and forth between Portrait and Landscape orientation. Every time I rotated it, the magnetic strength was so strong it would begin to rotate and unloosen the entire charger from the ball mount. Very frustrating. At first my solution was to stick on one of those charging metal rings on the back of my phone case, on top of the already existing ESR MagSafe ring built into the case. Because this provided a harder, smoother surface to rotate on as opposed to the soft plastic case material. This worked okay but the more I thought about it, I wondered why there was always so much friction when there shouldn't be any on the smooth glass surface of the charger. Upon further inspection, I figured out that the friction was being caused by this tiny black plastic lip that surrounds the outer edge of the entire glass surface of the charger. I am talking only about .5mm in height above the surface of the glass. You can feel it with your fingernail. This is what the case surface has actually been resting on, not the glass! Is this a defect? I don't know. But I have purchased two of these chargers and they both had this lip. Any ways, on to my modification....
I modified this ESR Charger by slicing off the excess lip surrounding the glass charging surface with a razor blade, see picture. Super easy. This allows for all surfaces to connect flat on to the charging surface. I held the razor blade at about a 45 degree angle all the way around. This eliminated the ridge that was causing the great amount of friction. If you always keep your phone in one orientation then this modification is not necessary. But for those that constantly rotate it, this makes a world of difference in smoothness! I removed the stick on metal ring on my case, don't need it anymore. The magnetic hold is super strong and I can smoothly and easily rotate between Portrait & Landscape, it works amazing! Now it is perfect, yes!
Images in this review
Top reviews from other countries
KT
Great product & exceptional customer service
Reviewed in Canada on July 17, 2024Color: BlackVerified Purchase
Manu
¡Adiós cables, hola Magia Magnética!
Reviewed in Spain on May 30, 2024Color: BlackVerified Purchase
Sangowan50
Une grande marque de qualité !
Reviewed in Belgium on January 11, 2024Color: BlackVerified Purchase