0 of 0
About this mod
This mod restores the high quality NPC character models and textures from the original (non-Definitive Edition) Steam version of the game.
- Requirements
- Permissions and credits
- Changelogs
- Donations
Installation instructions at the bottom
This mod is an extension of 'Project Rebuild Player Character Models', replacing all NPC models. While this mod works on it's own, it is highly recommended to also install 'Project Rebuild Player Character Models' for the full restored experience.
When Square Enix created the Definitive Edition of the game for Nintendo Switch, they reduced the quality of the game's models and textures, such that the game would be playable on the console. However, when porting the Definitive Edition back to PC, they did not restore the high quality assets from the original game, causing the game to be visually inferior to the original, but with extra content. Project Rebuild is a joint effort within the DQXIS modding community to restore much of the detail lost in the Definitive Edition.
Due to the vast quantity of work required to complete Project Rebuild, it is being attempted in small chunks that will each provide a meaningful improvement to the game as a whole.
This mod restores all of the NPC character models from the original game, including humanoid bosses, along with all their costumes. All costumes added in the Definitive Edition are still present, as before.
Each of the NPC character models was extracted from the original game, modified to remove unnecessary outline geometry, then cooked in UE4.18. Textures were extracted and cooked in UE4.18. Materials from the Definitive Edition were modified to replace textures, and altered to create new materials to replace those that had been removed.
DQXI Modding Discord: discord.gg/hWcdCpn
Tools used:
Assets Used:
Known Issues
Information for Modders
Creating mods for Project Rebuild:
Thanks
Huge thanks must be given to all the members of the DQXI Modding community for helping uncover the secrets of the game, and enable the creation of mods such as these.
Thanks to all the members of the DQXI Modding Discord, especially komodoxeno and mike9k1, who provide lots of support, and create and maintain the invaluable resources on (http://kmxn.me/dqxi-commands) that were used extensively to create and test this mod.
Installation Instructions
(Please only download this mod if you own a copy of both DRAGON QUEST® XI: Echoes of an Elusive Age™ - Digital Edition of Light and DRAGON QUEST® XI S: Echoes of an Elusive Age™ - Definitive Edition)
Steam
Extract the downloaded .zip, and copy the .pak file into {steamapps}\common\DRAGON QUEST XI S\Game\Content\Paks
where {steamapps} is your local steamapps folder, which, on Windows, is usually found under C:\Program Files (x86)\Steam\steamapps
Epic Games Store
Extract the downloaded .zip, and copy the .pak file into {install location}\DRAGON QUEST XI S\Game\Content\Paks
where {install location} is the game's install location, which, on Windows, is usually found under C:\Program Files\Epic Games
Microsoft Store
Extract the downloaded .zip, then follow the instructions here to install the .pak file: https://steamcommunity.com/sharedfiles/filedetails/?id=2723903805
Nintendo Switch
Your Nintendo Switch must be running Atmosphere custom firmware.
Download the latest Nintendo Switch compatible release, designated by the NS version suffix. Extract the downloaded .zip, then copy the "romfs" folder within into {SD Card Root}\atmosphere\contents\01006C300E9F0000\ where {SD Card Root} is the root of your Switch's SD card. Create the "01006C300E9F0000" folder if it does not already exist
Yuzu
Download the latest Nintendo Switch compatible release, designated by the NS version suffix.
On Windows, open Yuzu, right click on the game and click "Open Mod Data Location". Extract the downloaded .zip into this folder
Installation instructions for other platforms may vary. If unsure, please ask in the Discord server linked above
Ryujinx
Download the latest Nintendo Switch compatible release, designated by the NS version suffix.
On Windows, open Ryujinx, right click on the game and click "Open Atmosphere Mods Directory". Extract the downloaded .zip, then copy the "romfs" folder within into the folder Ryujinx opened
Installation instructions for other platforms may vary. If unsure, please ask in the Discord server linked above
This mod is an extension of 'Project Rebuild Player Character Models', replacing all NPC models. While this mod works on it's own, it is highly recommended to also install 'Project Rebuild Player Character Models' for the full restored experience.
When Square Enix created the Definitive Edition of the game for Nintendo Switch, they reduced the quality of the game's models and textures, such that the game would be playable on the console. However, when porting the Definitive Edition back to PC, they did not restore the high quality assets from the original game, causing the game to be visually inferior to the original, but with extra content. Project Rebuild is a joint effort within the DQXIS modding community to restore much of the detail lost in the Definitive Edition.
Due to the vast quantity of work required to complete Project Rebuild, it is being attempted in small chunks that will each provide a meaningful improvement to the game as a whole.
This mod restores all of the NPC character models from the original game, including humanoid bosses, along with all their costumes. All costumes added in the Definitive Edition are still present, as before.
Each of the NPC character models was extracted from the original game, modified to remove unnecessary outline geometry, then cooked in UE4.18. Textures were extracted and cooked in UE4.18. Materials from the Definitive Edition were modified to replace textures, and altered to create new materials to replace those that had been removed.
DQXI Modding Discord: discord.gg/hWcdCpn
Tools used:
- QuickBMS by Luigi Auriemma (http://aluigi.altervista.org/quickbms.htm)
- QuickBMS unpack scripts by spiritovod
- UModel by Gildor (https://www.gildor.org/en/projects/umodel)
- AssetEditor by kaiheilos (https://github.com/kaiheilos/Utilities)
- DQXIS-SDK by emoose (https://github.com/emoose/DQXIS-SDK/releases)
- Pack script by spiritovod (See Discord)
- DQXIS-UE4 by emoose (https://github.com/emoose/DQXIS-UE4), modified by Link4565 (See Discord)
Assets Used:
- Original Game Files from my copy of DRAGON QUEST® XI: Echoes of an Elusive Age™ - Digital Edition of Light (Steam)
Known Issues
- Some of the alternative costume colours added in the Definitive Edition show incorrect colour schemes on accessories such as helmets and capes. These may be fixed by installing Project Rebuild Player Character Models. Please report any issues that are not fixed by this.
- Character texture mods designed for the original game, or for the Definitive Edition, are NOT compatible with this mod. Only character texture mods designed specifically for use with Project Rebuild are compatible. All other mods should be compatible.
- Characters' clothing may very occasionally clip through their body during certain scenes.
- Some speech bubbles may be incorrectly positioned before interacting with NPCs. Please report any of these situations so they can be fixed.
- Please report any further issues using the Bugs tab, or by posting on the DQXI Modding Discord.
Information for Modders
Creating mods for Project Rebuild:
Spoiler:
Show
- The .pak file provided as part of this mod can be unpacked using QuickBMS included in the dq11s-tools-pack available on the DQXI Modding Discord, to show the names and locations of all textures used in this mod.
- ALL texture mods designed for the original game's characters should be compatible with this mod after conversion.
- Any new character texture mods should be designed in the same way as for the original game, since the character models and UVs are identical.
- Most textures are in the same file location as the original game. Very few have had to be modified compared to 'Project Rebuild Player Character Models'. Please check in the .pak for the required names and locations.
- With the new file names and locations known, textures should be cooked following the guide provided here: https://sites.google.com/view/dqxi-commands/tutorials/creating-mods
- _C textures must be cooked with compression setting: BC7, SRGB: True, and Never Stream: True.
- _N textures must be cooked with compression setting: Normalmap (BC5), SRGB: False, and Never Stream: True.
- _P textures must be cooked with compression setting: BC7, SRGB: False, and Never Stream: True.
- Mods can either be released as a folder of .uasset files for use with DQXIS-SDK, or as a .pak file. If released as a .pak file, the file must be named such that it sorts further down alphabetically than this mod's .pak file, otherwise it will not load.
- Making mods compatible with the Nintendo Swotch release requires further steps. Please ask in the DQXI Modding Discord for help.
- If you're stuck, ask in the DQXI Modding Discord for help.
Thanks
Huge thanks must be given to all the members of the DQXI Modding community for helping uncover the secrets of the game, and enable the creation of mods such as these.
Thanks to all the members of the DQXI Modding Discord, especially komodoxeno and mike9k1, who provide lots of support, and create and maintain the invaluable resources on (http://kmxn.me/dqxi-commands) that were used extensively to create and test this mod.
Installation Instructions
(Please only download this mod if you own a copy of both DRAGON QUEST® XI: Echoes of an Elusive Age™ - Digital Edition of Light and DRAGON QUEST® XI S: Echoes of an Elusive Age™ - Definitive Edition)
Steam
Extract the downloaded .zip, and copy the .pak file into {steamapps}\common\DRAGON QUEST XI S\Game\Content\Paks
where {steamapps} is your local steamapps folder, which, on Windows, is usually found under C:\Program Files (x86)\Steam\steamapps
Epic Games Store
Extract the downloaded .zip, and copy the .pak file into {install location}\DRAGON QUEST XI S\Game\Content\Paks
where {install location} is the game's install location, which, on Windows, is usually found under C:\Program Files\Epic Games
Microsoft Store
Extract the downloaded .zip, then follow the instructions here to install the .pak file: https://steamcommunity.com/sharedfiles/filedetails/?id=2723903805
Nintendo Switch
Your Nintendo Switch must be running Atmosphere custom firmware.
Download the latest Nintendo Switch compatible release, designated by the NS version suffix. Extract the downloaded .zip, then copy the "romfs" folder within into {SD Card Root}\atmosphere\contents\01006C300E9F0000\ where {SD Card Root} is the root of your Switch's SD card. Create the "01006C300E9F0000" folder if it does not already exist
Yuzu
Download the latest Nintendo Switch compatible release, designated by the NS version suffix.
On Windows, open Yuzu, right click on the game and click "Open Mod Data Location". Extract the downloaded .zip into this folder
Installation instructions for other platforms may vary. If unsure, please ask in the Discord server linked above
Ryujinx
Download the latest Nintendo Switch compatible release, designated by the NS version suffix.
On Windows, open Ryujinx, right click on the game and click "Open Atmosphere Mods Directory". Extract the downloaded .zip, then copy the "romfs" folder within into the folder Ryujinx opened
Installation instructions for other platforms may vary. If unsure, please ask in the Discord server linked above