PROS/CONS at the bottom
When I got my new 512gb Silicon Power NVME and formatted it, the first thing i did was run a read/write speed test with Crystal Mark. This is my first M.2 SSD and I was pretty shocked when i saw the temperatures jump to 67C in just a matter of seconds. I know they like to run somewhat hot, but I could only imagine the temps it would reach when doing something that was a bit more work than just a quick speed test.
So I figured a heatsink might be a good idea and stumbled on these (yes there are 2). I only really needed the one, but I also have a stick of Optane installed and figured I could use the other just to cover up the blue PCB.
Anyways, I ran the same test at the same ambient temperature and the NVME only reached 33C!
They definitely work as intended, and they come with everything needed to install. There were 4 decent quality thermal pads (2 standard thicker ones for each heatsink, a thinner one for the under side of the one with a backplate, and one that has precut squares in case you'd just like to put pads on certain chips like the controller.), as well as cleaning cloths, a mini screwdriver, and screws.
Install was a breeze (though there are NO instructions or pictures included), use the cleaning cloths to make sure there's no grease or residue on the surface of the heatsinsk, peel off the adhesive on the thermal pads and stick them on the sinks (they aren't overly sticky so you can get them back off fairly easily), then the bigger ones halves just slot together and gets tightened with screws and the smaller one uses good quality silicon bands to hold pressure onto the M.2, then just install onto the mobo as normal.
PROS:
-They feel like good quality aluminum and the finish on them is nice
-They don't take up much space at all if you're concerned about tight spaces
-Thermal pads feel good quality and weren't dried out
-They include all necessary bits to install them
-Easy enough installation
-They do cool surprisingly good!
-Fitment is good
-Great value for 2 heatsinks!
CONS:
-No instructions. It's still easy to set them up thankfully, just remember the thinnest pad goes on the bottom inside of the 2 piece heatsink
-Finish on the visible area is good, but on the side that contacts the pads there were some scratches and small nicks. No big deal as it's not going to be seen and it doesn't affect anything, but just wanted to put that out there
- The heatsink that uses the silicon bands doesn't quite go the full length of the SSD, it still covers all the necessary parts but i wish they had it go to the end of the drive with a little notch cut out for the screw like the bigger sink. Still have a bit of blue PCB showing.
I'd recommend these to anyone looking for an inexpensive and effective solution for cooling their M.2 drives!
Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime
Try Prime
and start saving today with fast, free delivery
Frequently bought together
This item: ELUTENG M.2 SSD Heatsink for PS5 / PC Easy Installation Heat Sink M2 SATA NVME Cooling Sink with 4 Thermal Silicone Pads M.2 SSD Cooler Set Heat Reduction for 2280 WD SanDisk Crucial Kingston SAMSUNG
$6.99
Get it as soon as Monday, Aug 5
In Stock
+
$4.99
Get it as soon as Monday, Aug 5
In Stock
+
$74.99
Get it as soon as Monday, Aug 5
In Stock
Total price:
To see our price, add these items to your cart.
Choose items to buy together.
Similar items that may ship from close to you
Page 1 of 1 Start overPage 1 of 1
From the brand
-
At ELUTENG, We believe that everyone deserves a better life. Therefore, our goal is to serve everyone by providing a range of computer accessories that are not only stylish but also economical. Since the establishment of the brand, we have taken "innovation to change the future" as our core value, we firmly believe that innovation can change the future, and have become one of the most popular online sellers of computer accessories products.
-
-
Hard Drive Enclosure
-
Hard Drive Enclosure
-
PCIE Card
-
Adapter
-
HDMI Cable
-
Outdoor Light
-
Outdoor Equipment
-
Computer Accessories
Product Description
ELUTENG PS5 SSD heatsink is specially designed for PS5 game console with effective cooling performance to keep your PS5 cool and stable! Please note that this PS5 cooler does not support PC computers or laptops or any other devices!
The PS5 NVME SSD heatsink is not only a SSD heatsink, but also a replacement expansion slot cover. Let the heat dissipate faster and more efficiently.
Features 10°C - 30°C cooling to better improve the performance of your PS5 gaming PC and make it more efficient.
Specification:
Supported devices: M.2 Gen4 NVME PCIE 4.0 SSD with a read speed of over 5,500 MB/s.
Size: 15.5*7*1cm
Material: Magnesium Aluminum Alloy
Color: Grey
|
|
|
|
|---|---|---|
Excellent heat dissipation 10℃～30℃The high-quality magnesium-aluminum alloy material has stronger heat dissipation performance, which can reduce the temperature of the SSD hard drive by 10°C - 30°C (depending on the environment), which can help your PS5 achieve better heat dissipation. |
Product SizeThe size of the newly upgraded M.2 NVME SSD heatsink is 15.5 x 7 x 1 cm and its design is perfectly compatible with PS5. |
Compatible with Gen4 PCIe NVMe 4.0 SSDsCompatible with Gen4 PCIe NVMe 4.0 SSDs Suggestion: PS5 machine can be equipped with M.2 NVME PCIE4.0 SSD, the read and write speed can reach 5500MB, and the gaming experience will be better when used with it. Recommended use with: Western Digital SN850, Samsung 980 PRO, WD_BLACK SN850 RGB, Kioxia SE10, Lexar NM800 or other Gen4 PCIe NVMe 4.0 SSD etc. |
Reviews with images
Easy to install, very effective cooling, and you get 2 for a really good price!
PROS/CONS at the bottomWhen I got my new 512gb Silicon Power NVME and formatted it, the first thing i did was run a read/write speed test with Crystal Mark. This is my first M.2 SSD and I was pretty shocked when i saw the temperatures jump to 67C in just a matter of seconds. I know they like to run somewhat hot, but I could only imagine the temps it would reach when doing something that was a bit more work than just a quick speed test.So I figured a heatsink might be a good idea and stumbled on these (yes there are 2). I only really needed the one, but I also have a stick of Optane installed and figured I could use the other just to cover up the blue PCB.Anyways, I ran the same test at the same ambient temperature and the NVME only reached 33C!They definitely work as intended, and they come with everything needed to install. There were 4 decent quality thermal pads (2 standard thicker ones for each heatsink, a thinner one for the under side of the one with a backplate, and one that has precut squares in case you'd just like to put pads on certain chips like the controller.), as well as cleaning cloths, a mini screwdriver, and screws.Install was a breeze (though there are NO instructions or pictures included), use the cleaning cloths to make sure there's no grease or residue on the surface of the heatsinsk, peel off the adhesive on the thermal pads and stick them on the sinks (they aren't overly sticky so you can get them back off fairly easily), then the bigger ones halves just slot together and gets tightened with screws and the smaller one uses good quality silicon bands to hold pressure onto the M.2, then just install onto the mobo as normal.PROS:-They feel like good quality aluminum and the finish on them is nice-They don't take up much space at all if you're concerned about tight spaces-Thermal pads feel good quality and weren't dried out-They include all necessary bits to install them-Easy enough installation-They do cool surprisingly good!-Fitment is good-Great value for 2 heatsinks!CONS:-No instructions. It's still easy to set them up thankfully, just remember the thinnest pad goes on the bottom inside of the 2 piece heatsink-Finish on the visible area is good, but on the side that contacts the pads there were some scratches and small nicks. No big deal as it's not going to be seen and it doesn't affect anything, but just wanted to put that out there- The heatsink that uses the silicon bands doesn't quite go the full length of the SSD, it still covers all the necessary parts but i wish they had it go to the end of the drive with a little notch cut out for the screw like the bigger sink. Still have a bit of blue PCB showing.I'd recommend these to anyone looking for an inexpensive and effective solution for cooling their M.2 drives!
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on June 28, 2020
When I got my new 512gb Silicon Power NVME and formatted it, the first thing i did was run a read/write speed test with Crystal Mark. This is my first M.2 SSD and I was pretty shocked when i saw the temperatures jump to 67C in just a matter of seconds. I know they like to run somewhat hot, but I could only imagine the temps it would reach when doing something that was a bit more work than just a quick speed test.
So I figured a heatsink might be a good idea and stumbled on these (yes there are 2). I only really needed the one, but I also have a stick of Optane installed and figured I could use the other just to cover up the blue PCB.
Anyways, I ran the same test at the same ambient temperature and the NVME only reached 33C!
They definitely work as intended, and they come with everything needed to install. There were 4 decent quality thermal pads (2 standard thicker ones for each heatsink, a thinner one for the under side of the one with a backplate, and one that has precut squares in case you'd just like to put pads on certain chips like the controller.), as well as cleaning cloths, a mini screwdriver, and screws.
Install was a breeze (though there are NO instructions or pictures included), use the cleaning cloths to make sure there's no grease or residue on the surface of the heatsinsk, peel off the adhesive on the thermal pads and stick them on the sinks (they aren't overly sticky so you can get them back off fairly easily), then the bigger ones halves just slot together and gets tightened with screws and the smaller one uses good quality silicon bands to hold pressure onto the M.2, then just install onto the mobo as normal.
PROS:
-They feel like good quality aluminum and the finish on them is nice
-They don't take up much space at all if you're concerned about tight spaces
-Thermal pads feel good quality and weren't dried out
-They include all necessary bits to install them
-Easy enough installation
-They do cool surprisingly good!
-Fitment is good
-Great value for 2 heatsinks!
CONS:
-No instructions. It's still easy to set them up thankfully, just remember the thinnest pad goes on the bottom inside of the 2 piece heatsink
-Finish on the visible area is good, but on the side that contacts the pads there were some scratches and small nicks. No big deal as it's not going to be seen and it doesn't affect anything, but just wanted to put that out there
- The heatsink that uses the silicon bands doesn't quite go the full length of the SSD, it still covers all the necessary parts but i wish they had it go to the end of the drive with a little notch cut out for the screw like the bigger sink. Still have a bit of blue PCB showing.
I'd recommend these to anyone looking for an inexpensive and effective solution for cooling their M.2 drives!
Easy to install, very effective cooling, and you get 2 for a really good price!
Reviewed in the United States on June 28, 2020
PROS/CONS at the bottomReviewed in the United States on June 28, 2020
When I got my new 512gb Silicon Power NVME and formatted it, the first thing i did was run a read/write speed test with Crystal Mark. This is my first M.2 SSD and I was pretty shocked when i saw the temperatures jump to 67C in just a matter of seconds. I know they like to run somewhat hot, but I could only imagine the temps it would reach when doing something that was a bit more work than just a quick speed test.
So I figured a heatsink might be a good idea and stumbled on these (yes there are 2). I only really needed the one, but I also have a stick of Optane installed and figured I could use the other just to cover up the blue PCB.
Anyways, I ran the same test at the same ambient temperature and the NVME only reached 33C!
They definitely work as intended, and they come with everything needed to install. There were 4 decent quality thermal pads (2 standard thicker ones for each heatsink, a thinner one for the under side of the one with a backplate, and one that has precut squares in case you'd just like to put pads on certain chips like the controller.), as well as cleaning cloths, a mini screwdriver, and screws.
Install was a breeze (though there are NO instructions or pictures included), use the cleaning cloths to make sure there's no grease or residue on the surface of the heatsinsk, peel off the adhesive on the thermal pads and stick them on the sinks (they aren't overly sticky so you can get them back off fairly easily), then the bigger ones halves just slot together and gets tightened with screws and the smaller one uses good quality silicon bands to hold pressure onto the M.2, then just install onto the mobo as normal.
PROS:
-They feel like good quality aluminum and the finish on them is nice
-They don't take up much space at all if you're concerned about tight spaces
-Thermal pads feel good quality and weren't dried out
-They include all necessary bits to install them
-Easy enough installation
-They do cool surprisingly good!
-Fitment is good
-Great value for 2 heatsinks!
CONS:
-No instructions. It's still easy to set them up thankfully, just remember the thinnest pad goes on the bottom inside of the 2 piece heatsink
-Finish on the visible area is good, but on the side that contacts the pads there were some scratches and small nicks. No big deal as it's not going to be seen and it doesn't affect anything, but just wanted to put that out there
- The heatsink that uses the silicon bands doesn't quite go the full length of the SSD, it still covers all the necessary parts but i wish they had it go to the end of the drive with a little notch cut out for the screw like the bigger sink. Still have a bit of blue PCB showing.
I'd recommend these to anyone looking for an inexpensive and effective solution for cooling their M.2 drives!
Images in this review
Reviewed in the United States on June 5, 2019
Reviewed in the United States on December 3, 2023
Top reviews from other countries
Julio
Muy buen servicio la verdad me llego antes de lo previsto
Reviewed in Mexico on June 10, 2023